"BioWrap 102 gave us a sustainable repair option without compromising on the performance we need for high-pressure pipeline systems. The ambient cure was a game-changer for our remote site operations."
— Operations Manager, Offshore Energy Client
The subsea specialist. Engineered for the harshest wet environments, Oceanus 142 is a water-activated composite that cures underwater. Pre-impregnated and ready to use straight from the pack, it requires no mixing and provides rapid, permanent reinforcement for subsea, splash zone, and topside defects where moisture is unavoidable.
Easy Application: Pre-impregnated and ready to apply right out of the packaging.
High Strength Repair: Tensile strength of 290 MPa for structural integrity.
Onshore Capabilities: Can be used topside by spraying with water to cure.
Subsea & Splash Zone: Water-activated resin makes it perfect for wet/underwater repairs.
High Chemical Resistance: Impervious to most fuels, chemicals, and solvents.
At Icarus Composites, we make sure to test our Composite Materials to the most stringent industrial standards ensuring we deliver the highest quality composite pipe and tank repairs possible.
Our Composite Systems are qualified to both ISO 24817 & ASME PCC-2 to make sure they meet the requirements of both international standards.
No mixing, no measuring—just submerge in water for 10-15 seconds and apply. Pre-impregnated in vacuum-sealed packaging for instant deployment.
Tested on non-leaking defects up to 476 bar—the highest pressure rating in the entire Icarus portfolio, proven at a UKAS-accredited laboratory.
Impervious to oils, fuels, solvents, saltwater and many industrial chemicals, making it ideal for offshore platforms and chemical processing environments.
Oceanus 142 is supplied as a pre-impregnated fabric in vacuum-sealed packaging. Once activated with water, it rapidly cures to form a rigid, chemically resistant composite wrap that adheres strongly to pipe substrates—even underwater.
Tack-free in as little as 30 minutes and fully cured in 24 hours at ambient conditions. The 30-40 minute working time gives applicators flexibility even in challenging subsea environments.
Operating range from -50°C to 122°C with application possible on surfaces from 4°C to 93°C. Impervious to oils, fuels, solvents, saltwater and many industrial chemicals.
Tested on non-leaking defects up to an extraordinary 476 bar—the highest in the Icarus portfolio. ASME PCC-2 compliant and ANSI/NSF 61 approved (with primer) for potable water.
Ideal for tidal and splash zone assets where moisture is unavoidable.
Chemical resistance to MEK, oil, toluene, gasoline, ethyl alcohol, saltwater.
Spray with water to initiate curing on topside pipes with condensation.
Water-activated resin cures underwater with 30–40 min working time.
Working time: 30–40 min @ 25°C. Tack-free: 30–60 min. Full cure: 24 hours. Shore D: 85–95.
Yes — ANSI/NSF Standard 61 (with approved primer).
Pre-impregnated in vacuum-sealed packaging. Submerge 10–15 seconds to activate. No mixing required.
Service: −50°C to 122°C. Application: 4°C to 93°C.
Carbon steel, stainless steel, CuNiFe, iron, GRP. Diameters from <15mm to large tanks.
Non-leaking: up to 476 bar — highest in entire Icarus portfolio. UKAS-accredited lab tested.
