"BioWrap 102 gave us a sustainable repair option without compromising on the performance we need for high-pressure pipeline systems. The ambient cure was a game-changer for our remote site operations."
— Operations Manager, Offshore Energy Client
Speed and consistency
Speed and consistency defined. Attalus SnapCure 140 is a factory pre-impregnated system that guarantees a perfect resin-to-fibre ratio every time. Designed for critical shutdowns, it delivers a full structural cure in just four minutes, getting your assets back online faster than any other solution.
Pre-impregnated: Ready to apply immediately; no on-site mixing errors.
Rapid Cure: Full structural cure achieved in just 4 minutes at 140°C.
Unparalleled Consistency: Factory-controlled resin ratio ensures perfect quality.
Industry Qualified: Rigorously tested to exceed ISO 24817 & ASME PCC-2.
High Pressure: Tested to hold 435 bar on non-leaking defects.
At Icarus Composites, we make sure to test our Composite Materials to the most stringent industrial standards ensuring we deliver the highest quality composite pipe and tank repairs possible.
Our Composite Systems are qualified to both ISO 24817 & ASME PCC-2 to make sure they meet the requirements of both international standards.
Full structural cure in just 4 minutes at 140°C—get your assets back online faster than any other composite repair system on the market.
Factory pre-impregnated with precisely controlled resin-to-fibre ratio eliminates on-site mixing variables and ensures consistent quality every time.
Independently tested by UKAS-accredited laboratories and qualified to both ISO 24817:2017 and ASME PCC-2-2018 standards.
Attalus SnapCure 140 arrives ready to apply. The factory-controlled impregnation process guarantees a perfect resin-to-fibre ratio every time, eliminating mixing errors and ensuring consistent mechanical properties across every repair.
From small diameter pipes to large tanks, Attalus SnapCure 140 adapts to your repair needs. It conforms to complex geometries including elbows, tees, flanges, and valves without compromising structural integrity.
Independently tested to withstand extreme pressures: up to 435 bar (6,309 psi) on non-leaking defects with just 1mm wall thickness remaining, and 225 bar (3,408 psi) on leaking defects.
Every Attalus SnapCure 140 repair meets the rigorous requirements of ISO 24817:2017 and ASME PCC-2-2018 Chapter 4, giving you confidence in regulatory compliance and long-term performance.
Restore structural integrity to externally and internally corroded pipes without hot work or system shutdown.
Tested on leaking defects up to 225 bar (3,408 psi) on 15mm holes.
Reinforce structurally compromised assets including beams, supports, and non-pressure components.
Repair corroded or damaged tanks and vessels with a system that conforms to complex geometries.
Yes — 12-inch fuel oil line repair available for download.
Up to 20 years per ISO 24817 / ASME PCC-2.
Factory pre-impregnated and ready to apply after surface prep. No on-site mixing required.
Non-leaking: up to 435 bar. Leaking: up to 225 bar on a 15mm hole.
Full structural cure in 1 hour at 120°C using a heater blanket.
Carbon steel, stainless steel. Complex geometries including elbows, tees, flanges, valves.
